K-SENSOREN CS1 RD MIT STECKER
Sensors »CS1« type, cable with M8 plugProduct image
Item
Sort upwards
Sort downwards
Identification | Ø piston | Design |
---|---|---|
K- 07 15 22 83 | 8 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 84 | 10 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 85 | 12 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 86 | 16 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 87 | 20 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 88 | 25 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 89 | 32 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 90 | 40 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, NPN |
K- 07 15 22 99 | 8 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 00 | 10 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 01 | 12 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 02 | 16 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 03 | 20 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 04 | 25 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 05 | 32 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 23 06 | 40 mm | Hall sensor, 3-wire, with M 8 plug, with 150 mm cable length, NO, PNP |
K- 07 15 22 69 | 12 mm | REED sensor, 2-wire, M 8-plug, 150 mm cable, NO |
K- 07 15 22 70 | 16 mm | REED sensor, 2-wire, M 8-plug, 150 mm cable, NO |
K- 07 15 22 67 | 8 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
K- 07 15 22 68 | 10 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
K- 07 15 22 71 | 20 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
K- 07 15 22 72 | 25 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
K- 07 15 22 73 | 32 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
K- 07 15 22 74 | 40 mm | Reed sensor, 2-wire, with M 8 plug, with 150 mm cable length, NO |
Accessory for following products
- K-RUNDZYLINDER DOPP O E D MI
- Round cylinders, double-acting, with magnet, non-cushioned, »MI« Series
- K-RUNDZYLINDER EINF DL O D MSI
- Round cylinders, single-acting (pressureless in the retracted position), with magnet, non-cushioned, »MSI« Series
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.