Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-RUNDZYLINDER EINF DL O D MSI
Round cylinders, single-acting (pressureless in the retracted position), with magnet, non-cushioned, »MSI« Series
Product image
Properties
| Media |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Working pressure |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
| Temp. range |
-20 °C to +70 °C |
| Piston rod |
Stainless steel 1.4301 |
| Design |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
| Piston |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
| Sealant |
NBR |
| Cylinder pipe |
Stainless steel 1.4301 |
Description
Series "MSI" single-acting, pressureless retraction, Ø 8 - 40
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Ø piston | Stroke (mm) |
Design | Ø piston rod (mm) |
Piston rod thread |
|---|---|---|---|---|---|
| K- 07 15 19 46 | 8 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 47 | 8 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 48 | 8 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 49 | 8 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 50 | 8 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 51 | 8 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 52 | 8 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 53 | 10 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 54 | 10 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 55 | 10 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 56 | 10 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 57 | 10 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 58 | 10 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 59 | 10 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 60 | 12 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 61 | 12 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 62 | 12 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 63 | 12 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 64 | 12 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 65 | 12 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 66 | 12 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 67 | 16 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 68 | 16 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 69 | 16 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 70 | 16 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 71 | 16 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 72 | 16 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 73 | 16 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 74 | 16 mm | 60 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 75 | 16 mm | 75 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 76 | 16 mm | 80 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 77 | 16 mm | 100 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 78 | 20 mm | 10 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 79 | 20 mm | 15 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 80 | 20 mm | 20 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 81 | 20 mm | 25 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 82 | 20 mm | 30 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 83 | 20 mm | 40 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 84 | 20 mm | 50 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 85 | 20 mm | 60 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 86 | 20 mm | 75 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 87 | 20 mm | 80 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 88 | 20 mm | 100 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 89 | 20 mm | 125 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 90 | 20 mm | 150 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 91 | 25 mm | 10 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 92 | 25 mm | 15 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 93 | 25 mm | 20 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 94 | 25 mm | 25 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 95 | 25 mm | 30 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 96 | 25 mm | 40 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 97 | 25 mm | 50 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 98 | 25 mm | 60 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 99 | 25 mm | 75 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 00 | 25 mm | 80 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 01 | 25 mm | 100 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 02 | 25 mm | 125 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 03 | 25 mm | 150 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 04 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 05 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 06 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 07 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 08 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 09 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 10 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 11 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 12 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 13 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 14 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 15 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 16 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 17 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 18 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 19 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 20 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 21 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 22 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 23 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 24 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 25 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 26 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 27 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 28 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 29 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
Accessories
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.