K-RUNDZYLINDER DOPP O E D MI
Round cylinders, double-acting, with magnet, non-cushioned, »MI« Series
Product image
![K-RUNDZYLINDER DOPP O E D MI K-RUNDZYLINDER DOPP O E D MI](/data/img/product/00041490_0.jpg)
![K-RUNDZYLINDER DOPP O E D MI - data/img/product/00048889_0.gif data/img/product/00048889_0.gif - K-RUNDZYLINDER DOPP O E D MI](/data/img/product/00048889_0.gif)
Properties
Media |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
Working pressure |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
Temp. range |
-20 °C to +70 °C |
Piston rod |
Stainless steel 1.4301 |
Design |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
Piston |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
Sealant |
NBR |
Cylinder pipe |
Stainless steel 1.4301 |
Description
Circular cylinder in stainless steel in different versions: Series "MI" double-acting, Ø 8 – 25 in accordance with ISO 6432
Series "MI" double-acting, Ø 32 - 40
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Ø piston | Stroke (mm) |
Design | Ø piston rod (mm) |
Piston rod thread |
---|---|---|---|---|---|
K- 07 15 17 90 | 8 mm | 10 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 91 | 8 mm | 15 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 92 | 8 mm | 20 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 93 | 8 mm | 25 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 94 | 8 mm | 30 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 95 | 8 mm | 40 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 96 | 8 mm | 50 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 97 | 8 mm | 60 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 98 | 8 mm | 75 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 99 | 8 mm | 80 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 00 | 8 mm | 100 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 01 | 8 mm | 125 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 02 | 8 mm | 150 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 03 | 10 mm | 10 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 04 | 10 mm | 15 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 05 | 10 mm | 20 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 06 | 10 mm | 25 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 07 | 10 mm | 30 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 08 | 10 mm | 40 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 09 | 10 mm | 50 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 10 | 10 mm | 60 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 11 | 10 mm | 75 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 12 | 10 mm | 80 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 13 | 10 mm | 100 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 14 | 10 mm | 125 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 15 | 10 mm | 150 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 16 | 10 mm | 160 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 17 | 10 mm | 175 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 18 | 10 mm | 200 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 19 | 12 mm | 10 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 20 | 12 mm | 15 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 21 | 12 mm | 20 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 22 | 12 mm | 25 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 23 | 12 mm | 30 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 24 | 12 mm | 40 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 25 | 12 mm | 50 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 26 | 12 mm | 60 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 27 | 12 mm | 75 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 28 | 12 mm | 80 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 29 | 12 mm | 100 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 30 | 12 mm | 125 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 31 | 12 mm | 150 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 32 | 12 mm | 160 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 33 | 12 mm | 175 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 34 | 12 mm | 200 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 35 | 12 mm | 250 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 36 | 16 mm | 10 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 37 | 16 mm | 15 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 38 | 16 mm | 20 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 39 | 16 mm | 25 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 40 | 16 mm | 30 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 41 | 16 mm | 40 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 42 | 16 mm | 50 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 43 | 16 mm | 60 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 44 | 16 mm | 75 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 45 | 16 mm | 80 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 46 | 16 mm | 100 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 47 | 16 mm | 125 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 48 | 16 mm | 150 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 49 | 16 mm | 160 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 50 | 16 mm | 175 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 51 | 16 mm | 200 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 52 | 16 mm | 250 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 53 | 16 mm | 300 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 54 | 20 mm | 10 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 55 | 20 mm | 15 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 56 | 20 mm | 20 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 57 | 20 mm | 25 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 58 | 20 mm | 30 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 59 | 20 mm | 40 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 60 | 20 mm | 50 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 61 | 20 mm | 60 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 62 | 20 mm | 75 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 63 | 20 mm | 80 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 64 | 20 mm | 100 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 65 | 20 mm | 125 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 66 | 20 mm | 150 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 67 | 20 mm | 160 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 68 | 20 mm | 175 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 69 | 20 mm | 200 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 70 | 20 mm | 250 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 71 | 20 mm | 300 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 72 | 20 mm | 350 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 73 | 20 mm | 400 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 74 | 20 mm | 450 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 75 | 20 mm | 500 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 76 | 20 mm | 600 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 77 | 25 mm | 10 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 78 | 25 mm | 15 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 79 | 25 mm | 20 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 80 | 25 mm | 25 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 81 | 25 mm | 30 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 82 | 25 mm | 40 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 83 | 25 mm | 50 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 84 | 25 mm | 60 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 85 | 25 mm | 75 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 86 | 25 mm | 80 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 87 | 25 mm | 100 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 88 | 25 mm | 125 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 89 | 25 mm | 150 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 90 | 25 mm | 160 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 91 | 25 mm | 175 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 92 | 25 mm | 200 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 93 | 25 mm | 250 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 94 | 25 mm | 300 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 95 | 25 mm | 350 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 96 | 25 mm | 400 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 97 | 25 mm | 450 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 98 | 25 mm | 500 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 99 | 25 mm | 600 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 19 00 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 01 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 02 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 03 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 04 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 05 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 06 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 07 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 08 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 09 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 10 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 11 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 12 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 13 | 32 mm | 160 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 14 | 32 mm | 175 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 15 | 32 mm | 200 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 16 | 32 mm | 250 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 17 | 32 mm | 300 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 18 | 32 mm | 350 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 19 | 32 mm | 400 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 20 | 32 mm | 450 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 21 | 32 mm | 500 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 22 | 32 mm | 600 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 23 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 24 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 25 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 26 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 27 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 28 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 29 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 30 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 31 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 32 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 33 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 34 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 35 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 36 | 40 mm | 160 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 37 | 40 mm | 175 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 38 | 40 mm | 200 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 39 | 40 mm | 250 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 40 | 40 mm | 300 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 41 | 40 mm | 350 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 42 | 40 mm | 400 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 43 | 40 mm | 450 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 44 | 40 mm | 500 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 45 | 40 mm | 600 | »CM« type | 16 | M 12 x 1.25 |
Accessories
![](/images/up.gif)
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.