K-FI MIKRO BIS 60 BAR
Micro-filters for high pressures up to 60 barProduct image
Properties
Input pressure |
Max. 60 bar |
Operating temperature |
0 °C to +90 °C |
Efficiency |
99.9999 % |
Pore size in filter element |
0.01 μm |
Sealant |
NBR |
Container |
Brass |
Filter element |
Borosilicate |
Housing |
Aluminium |
Flow rate measurement |
At P2 = 6 bar and pressure dropl ∆p = 0,5 bar |
Description
Fine filter for all applications with particularly strict compressed air purity requirements. Micro-filters should always be used in conjunction with a standard filter connected upstream to trap coarse impurities and protect the micro-filter inserts.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
---|---|---|---|---|---|
K- 07 25 06 21 | G 3/8 | 2000 | 73,0 | 187.0 mm | 25,0 |
K- 07 25 06 22 | G 1/2 | 2000 | 65,0 | 187.0 mm | 25,0 |
K- 07 25 06 23 | G 3/4 | 2300 | 92,0 | 196.0 mm | 29,0 |
K- 07 25 06 24 | G 1 | 2300 | 80,0 | 196.0 mm | 29,0 |
Accessories
- K-HALTERBAUSATZ
- Holder
Spare parts
- K-FILTERELEMENT STANDARD
- Filter element
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.