Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-HOCHDRUCKREGLER 60 BAR
High-pressure regulators up to 60 bar
Product image
Properties
| Application |
Compressed air and other neutral, non-flammable gases |
| Input pressure |
Max. 60 bar |
| Operating temperature |
-10 °C to +90 °C |
| Sealant |
NBR |
| Material |
Brass |
| Flow rate measurement |
At P1 = 20 bar, P2 = 10 bar and pressure drop Δp = 4 bar |
Description
Reversible piston-type pressure regulator, virtually independent of inlet pressure, with self-relieving design, manufactured entirely in brass. Specially designed for high pressures up to 60 bar. Pressure catch with counter nut.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 25 08 19 | G 3/8 | 0.5 - 12 bar | 1400 | 72,0 | 164.0 mm | 31,0 | 133,0 |
| K- 07 25 08 20 | G 3/8 | 1 - 20 bar | 1400 | 72,0 | 164.0 mm | 31,0 | 133,0 |
| K- 07 25 08 21 | G 3/8 | 2 - 35 bar | 1400 | 72,0 | 164.0 mm | 31,0 | 133,0 |
| K- 07 25 08 22 | G 3/8 | 2 - 50 bar | 1400 | 72,0 | 164.0 mm | 31,0 | 133,0 |
| K- 07 25 08 23 | G 1 | 0.5 - 12 bar | 5000 | 118,0 | 257.0 mm | 51,0 | 206,0 |
| K- 07 25 08 24 | G 1 | 1 - 20 bar | 5000 | 118,0 | 257.0 mm | 51,0 | 206,0 |
| K- 07 25 08 25 | G 1 | 2 - 35 bar | 5000 | 118,0 | 257.0 mm | 51,0 | 206,0 |
| K- 07 25 08 26 | G 1 | 3 - 50 bar | 5000 | 118,0 | 257.0 mm | 51,0 | 206,0 |
Accessories
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELBEFESTIGUNG
- Switchboard attachment
Spare parts
- K-DICHTKEGEL KOMPL
- Cone seal complete
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.