K-FI H ABBLV BIS 40BAR
Filters for high pressures up to 40 barProduct image
Properties
Input pressure |
Max. 40 bar |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 90 °C |
Pore size in filter element |
40 μm |
Housing |
Aluminium |
Condensate container |
Brass (G 3/8 to G 1). Alu (G 1 1/2 to G 2) |
Flow rate measurement |
At P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Centrifugal separators with a sintered filter element.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
---|---|---|---|---|---|
K- 07 25 06 11 | G 3/8 | 2650 | 73,0 | 194.0 mm | 32,5 |
K- 07 25 06 12 | G 1/2 | 2650 | 65,0 | 194.0 mm | 32,5 |
K- 07 25 06 13 | G 3/4 | 3350 | 92,0 | 205.0 mm | 40,0 |
K- 07 25 06 14 | G 1 | 3350 | 80,0 | 205.0 mm | 40,0 |
K- 07 25 06 15 | G 1 1/2 | 20000 | 160,0 | 284.0 mm | 42,5 |
K- 07 25 06 16 | G 2 | 20000 | 140,0 | 284.0 mm | 42,5 |
Spare parts
- K-DICHTKEGEL KOMPL
- Cone seal complete
- K-FILTERELEMENT
- Filter element
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.