K-DRG MANO HANSA PRO
Pressure regulator, with pressure gauge, HANSA PROProduct image
Properties
Output pressure |
Pa 0,5 - 8 bar (Standart) Pa 0,1 - 1 bar Pa 0,1 - 2 bar Pa 0,2 - 4 bar Pa 0,5 - 10 bar Pa 0,5 - 16 bar |
Media temperature |
-10 °C to +50 °C |
Ambient temperature |
-10 °C to +50 °C |
Media |
Compressed air |
Design |
Diaphragm pressure regulator with relieving |
Mounting type |
Line mounting, panel mounting, mounting kit or wall mounting |
actuation type/lock |
lockable handwheel |
Installation position |
Any |
Thread pressure gauge |
G 1/4 i |
Nominal flow-rate G1/2 |
5.100 l/min (P1 = 10 bar, P2 = 6,3 bar/Delta P = 1 bar) |
Nominal flow-rate G 3/8 |
4.300 l/min (P1 = 10 bar, P2 = 6,3 bar/Delta P = 1 bar) |
Pe max |
16 bar |
Housing |
PA66 |
Diaphragm, seals |
Ms/NBR/PA6 |
Item
Sort upwards
Sort downwards
Identification | Connection | Control range | Indicating range | Size |
---|---|---|---|---|
K- 07 25 21 36 | G 3/8 i | 0.1 - 1 bar | 0 - 1,6 bar | 2 |
K- 07 25 21 37 | G 3/8 i | 0.1 - 2 bar | 0 - 2,5 bar | 2 |
K- 07 25 21 38 | G 3/8 i | 0.2 - 4 bar | 0 - 6 bar | 2 |
K- 07 25 21 39 | G 3/8 i | 0.5 - 8 bar | 0 - 10 bar | 2 |
K- 07 25 21 40 | G 3/8 i | 0.5 - 10 bar | 0 - 16 bar | 2 |
K- 07 25 21 41 | G 3/8 i | 0.5 - 16 bar | 0 - 25 bar | 2 |
K- 07 25 21 42 | G 1/2 i | 0.1 - 1 bar | 0 - 1,6 bar | 2 |
K- 07 25 21 43 | G 1/2 i | 0.1 - 2 bar | 0 - 2,5 bar | 2 |
K- 07 25 21 44 | G 1/2 i | 0.2 - 4 bar | 0 - 6 bar | 2 |
K- 07 25 21 45 | G 1/2 i | 0.5 - 8 bar | 0 - 10 bar | 2 |
K- 07 25 21 46 | G 1/2 i | 0.5 - 10 bar | 0 - 16 bar | 2 |
K- 07 25 21 47 | G 1/2 i | 0.5 - 16 bar | 0 - 25 bar | 2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.