Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH 3-TLG MET M ABLV TRO STANDAD
Service units with metal bowl and manual drain valve, metal sight dome
Product image
Properties
| Input pressure |
Max. 16 bar (polycarbonate bowl / bowl guard), Max. 25 bar (metal bowl) |
| Control range |
0.5 to 10 bar (polycarbonate bowl / bowl guard)0.5 to 16 bar (metal bowl) |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Pore size in filter element |
5 μm (G 1/4 / G 3/8 / G 1/2), 40 μm (G 3/8 / G 3/4 / G 1 / G 1 1/4 / G 1 1/2) |
| Sealant |
NBR |
| Housing |
Die-cast zinc / Aluminium, painted silver |
| Dropper |
PA (polycarbonate bowl), Zinc-glass-NBR (metal bowl) |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| More information |
User manual on request |
Description
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, centrifugal separator and proportional lubricator.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
DN | Ø pressure gauge |
|---|---|---|---|---|---|---|---|
| K- 07 25 14 50 | G 1/4 | 600 | 172,0 | 184.5 mm | 51,0 | 6 | 50 |
| K- 07 25 14 57 | G 3/8 | 600 | 185,0 | 184.5 mm | 51,0 | 6 | 50 |
| K- 07 25 14 60 | G 3/8 | 1400 | 232,0 | 210.0 mm | 51,0 | 6 | 50 |
| K- 07 25 14 63 | G 1/2 | 3200 | 259,0 | 226.0 mm | 55,0 | 15 | 63 |
| K- 07 25 14 66 | G 3/4 | 3200 | 302,0 | 230.5 mm | 58,0 | 20 | 63 |
| K- 07 25 14 69 | G 1 | 3200 | 302,0 | 230.5 mm | 58,0 | 25 | 63 |
| K- 07 25 14 72 | G 1 1/4 | 5000 | 395,0 | 316.0 mm | 70,0 | 25 | 63 |
| K- 07 25 14 75 | G 1 1/2 | 5000 | 395,0 | 316.0 mm | 70,0 | 35 | 63 |
Spare parts
- K-HALTERBAUSATZ STANDARD
- Holder
- K-SCHUTZKORB G
- Protective cage
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-FILTERELEMENT
- Filter element
- K-TROPFAUFSATZ POLYCARBO
- Drip attachment polycarbonate
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
- K-XV AGM MS NI
- Double nipples, parallel male thread, nickel-plated brass
- K-RD NIPPEL MS NI
- Reducing nipples - nickel-plated brass
- K-TROPFAUFSATZ METALL
- Drip attachment metal
- K-ABLASSVENTIL AUTO
- Fully-automatic drain valve with Adapter G 1/8
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.