Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-KONSTANT DRUCKREGLER STANDARD 2
Constant-pressure regulators
Product image
Properties
| Input pressure |
Max. 25 bar (G 1/4 to G 1/2), Max. 40 bar (G 3/4 to G 1 1/2) |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 90 °C |
| Sealant |
NBR |
| Housing |
Die-cast zinc for (G 1/4 to G 1/2), for Brass (G 3/4 to G 1 1/2) |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| More information |
User manual on request |
Description
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure regulators maintain a constant working pressure regardless of variations in the inlet pressure.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
|---|---|---|---|---|---|---|---|---|
| K- 07 25 03 98 | G 3/4 | 0.5 - 3 bar | 8700 | 116,0 | 93.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 03 99 | G 3/4 | 0.5 - 6 bar | 8200 | 116,0 | 93.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 00 | G 3/4 | 0.5 - 10 bar | 7830 | 116,0 | 93.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 01 | G 3/4 | 0.5 - 16 bar | 7400 | 116,0 | 93.0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 02 | G 3/4 | 0.5 - 25 bar | 6500 | 116,0 | 93.0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 03 | G 1 | 0.5 - 3 bar | 8700 | 116,0 | 81.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 04 | G 1 | 0.5 - 6 bar | 8200 | 116,0 | 81.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 05 | G 1 | 0.5 - 10 bar | 7830 | 116,0 | 81.0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 06 | G 1 | 0.5 - 16 bar | 7400 | 116,0 | 81.0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 07 | G 1 | 0.5 - 25 bar | 6500 | 116,0 | 81.0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 08 | G 1 1/4 | 0.5 - 3 bar | 16000 | 114,0 | 126.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 09 | G 1 1/4 | 0.5 - 6 bar | 14000 | 114,0 | 126.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 10 | G 1 1/4 | 0.5 - 10 bar | 12160 | 114,0 | 126.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 11 | G 1 1/4 | 0.5 - 16 bar | 11000 | 114,0 | 126.0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 12 | G 1 1/4 | 0.5 - 25 bar | 8500 | 114,0 | 126.0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 13 | G 1 1/2 | 0.5 - 3 bar | 16000 | 114,0 | 114.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 14 | G 1 1/2 | 0.5 - 6 bar | 14000 | 114,0 | 114.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 15 | G 1 1/2 | 0.5 - 10 bar | 12160 | 114,0 | 114.0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 16 | G 1 1/2 | 0.5 - 16 bar | 11000 | 114,0 | 114.0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 17 | G 1 1/2 | 0.5 - 25 bar | 8500 | 114,0 | 114.0 mm | 48,0 | 184,0 | 25 |
Spare parts
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.