Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GA FPM
Wiper GA-FPM
Product image
Properties
| Design |
Wipers |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-20 °C |
| Temp. max. |
200 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
is pressed into an open groove |
| Material |
(1) Sleeve: Steel Wiper: FPM |
| Application |
Hydraulics |
Description
Low spatial requirement.
No penetration of dirt via the outer metal ring.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
H (mm) |
|---|---|---|---|---|
| GA 16 22-3 FPM | 16 | 22 | 3,0 | 4 |
| GA 25 35-7 FPM | 25 | 35 | 7,0 | 10 |
| GA 30 40-7 FPM | 30 | 40 | 7,0 | 10 |
| GA 32 45-4 FPM | 32 | 45 | 4,0 | 8 |
| GA 45 55-7 FPM | 45 | 55 | 7,0 | 10 |
| GA 45 60-7 FPM | 45 | 60 | 7,0 | 10 |
| GA 50 56-5 FPM | 50 | 56 | 5,0 | 8 |
| GA 60 70-7 FPM | 60 | 70 | 7,0 | 10 |
| GA 63 75-7 FPM | 63 | 75 | 7,0 | 10 |
| GA 70 80-7 FPM | 70 | 80 | 7,0 | 10 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.