GE HMOK AJ
Screw-in sockets
Product image
![GE HMOK AJ GE HMOK AJ](/data/img/product/GE_HMOK_AJ_Foto.jpg)
![GE HMOK AJ - data/img/product/GE_HROK_AJ_MEx.gif data/img/product/GE_HROK_AJ_MEx.gif - GE HMOK AJ](/data/img/product/GE_HROK_AJ_MEx.gif)
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
Thread socket with O-ring + spacer diaphragm ring |
Connection 2 |
UN/UNF nut threads |
Sealing form 2 |
74° inner cone |
Design |
Screw-in sockets |
Construction |
straight |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
G1 | G2 | AF (mm) |
S1 | OR |
---|---|---|---|---|---|
GE HMOK 10 AJ 04 | M 10 x 1 | 7/16"-20 UNF | 14 | 16 | 8.0 x 1.5 |
GE HMOK 10 AJ 05 | M 10 x 1 | 1/2"-20 UNF | 14 | 17 | 8.0 x 1.5 |
GE HMOK 12 AJ 04 | M 12 x 1.5 | 7/16"-20 UNF | 17 | 16 | 9.3 x 2.4 |
GE HMOK 12 AJ 05 | M 12 x 1.5 | 1/2"-20 UNF | 17 | 17 | 9.3 x 2.4 |
GE HMOK 14 AJ 05 | M 14 x 1.5 | 1/2"-20 UNF | 19 | 17 | 11.3 x 2.4 |
GE HMOK 14 AJ 06 | M 14 x 1.5 | 9/16"-18 UNF | 19 | 19 | 11.3 x 2.4 |
GE HMOK 16 AJ 06 | M 16 x 1.5 | 9/16"-18 UNF | 22 | 19 | 13.3 x 2.4 |
GE HMOK 16 AJ 08 | M 16 x 1.5 | 3/4"-16 UNF | 22 | 22 | 13.3 x 2.4 |
GE HMOK 18 AJ 08 | M 18 x 1.5 | 3/4"-16 UNF | 24 | 22 | 15.3 x 2.4 |
GE HMOK 18 AJ 10 | M 18 x 1.5 | 7/8"-14 UNF | 24 | 27 | 15.3 x 2.4 |
GE HMOK 20 AJ 10 | M 20 x 1.5 | 7/8"-14 UNF | 27 | 27 | 17.3 x 2.4 |
GE HMOK 22 AJ 10 | M 22 x 1.5 | 7/8"-14 UNF | 27 | 27 | 19.3 x 2.4 |
GE HMOK 22 AJ 12 | M 22 x 1.5 | 1.1/16" -12 UN | 27 | 32 | 19.3 x 2.4 |
GE HMOK 26 AJ 14 | M 26 x 1.5 | 1.3/16" -12 UN | 36 | 36 | 23.5 x 2.6 |
GE HMOK 27 AJ 12 | M 27 x 2 | 1.1/16" -12 UN | 32 | 32 | 23.6 x 2.9 |
GE HMOK 27 AJ 16 | M 27 x 2 | 1.5/16" -12 UN | 32 | 38 | 23.6 x 2.9 |
GE HMOK 33 AJ 16 | M 33 x 2 | 1.5/16" -12 UN | 41 | 38 | 29.5 x 3.0 |
GE HMOK 42 AJ 20 | M 42 x 2 | 1.5/8" -12 UN | 50 | 50 | 38.0 x 3.0 |
GE HMOK 48 AJ 24 | M 48 x 2 | 1.7/8" -12 UN | 60 | 60 | 44.0 x 3.0 |
SW, S1, S2 = With across flats
Spare parts
![](/images/up.gif)
- KAMMRING M
- Diaphragm ring, metric
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.