Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK CFE
Cylinder base with oil inlet
Product image
Properties
| Material |
Steel S355J0 (Fe510C) |
Item
Sort upwards
Sort downwards
 Identification |
Ø AL (mm) |
Ø F (mm) |
Ø T (mm) |
G | H (mm) |
I (mm) |
S (mm) |
S1 (mm) |
Z (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| HK CFE 040 050 4 | 40 | 16,20 | 50 | G 1/4” | 15 | 30,0 | 50 | 2 | 33 | 0,60 |
| HK CFE 050 060 6 | 50 | 20,25 | 60 | G 3/8” | 20 | 38,0 | 60 | 2 | 38 | 1,10 |
| HK CFE 060 070 6 | 60 | 25,25 | 70 | G 3/8” | 23 | 38,0 | 60 | 2 | 35 | 1,40 |
| HK CFE 070 080 6 | 70 | 25,25 | 80 | G 3/8” | 23 | 38,0 | 60 | 2 | 35 | 1,95 |
| HK CFE 080 095 8 | 80 | 30,25 | 95 | G 1/2” | 25 | 47,0 | 75 | 2 | 48 | 2,50 |
| HK CFE 100 115 8 | 100 | 35,25 | 115 | G 1/2” | 30 | 47,0 | 75 | 2 | 43 | 4,50 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.