Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FDCV
Flow divider / combiner FDCV
Product image
Properties
| Design |
pressure-compensated |
| Operating pressure |
max. 350 bar |
Description
flow divider / combiner - pressure compensated
Division ratio 50 % : 50 %
Max. deviation at Q > 40% Qmax: ± 2.5%
Note
The greatest division accuracy is achieved in the range of the max. intake volumetric flow.
These valves can also be used for combining volumetric flows. (see circuit symbol)
Tightening torque for valve size 10 with Alu housing: 47-54 Nm
Tightening torque for valve size 10 with Steel housing: 74-81 Nm
Item
Sort upwards
Sort downwards
 Identification |
Qon min. (L/min) |
Qon max. (L/min) |
Screw-in housing | Screw-in thread | Weight (kg) |
|---|---|---|---|---|---|
| HK FDCV 10 N0 11 | 3,5 | 7,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
| HK FDCV 10 N0 22 | 7,5 | 15,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
| HK FDCV 10 N0 33 | 11,0 | 22,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
| HK FDCV 10 N0 44 | 15,0 | 30,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
| HK FDCV 10 N0 66 | 22,5 | 45,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
| HK FDCV 10 N0 88 | 30,0 | 60,0 | HK GEH 12 C1040 ST | SAE 10/2 7/8"-14UNF-2B | 0,14 |
Qein - intake volumetric flow
Accessories
- HK GEH 40 AL
- Housing for flow divider SAE 3-way aluminium
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.