HK PAM 014 R
Manual pump for pipeline installationProduct image
Properties
Material |
Housing: cast iron, inner parts steel |
Note
The pressure relief valves must be set according to the application.
Item
Sort upwards
Sort downwards
Identification | Thread | Vdh (ccm) (cc) |
Design | p max. (bar) |
Pressure (30)* (bar) |
Weight (kg) |
---|---|---|---|---|---|---|
HK PAM 014 20 00 | 1/2-3/8" IG | 20 | with manual drain | 350 | 130 | 2,75 |
HK PAM 014 20 02 | 1/2-3/8" IG | 20 | without manual drain and pressure relief valve | 350 | 130 | 2,70 |
HK PAM 014 20 04 | 1/2-3/8" IG | 20 | with pressure relief valve | 350 | 130 | 2,90 |
HK PAM 014 40 00 | 1/2-1/2" IG | 40 | with manual drain | 280 | 90 | 3,65 |
HK PAM 014 40 04 | 1/2-1/2" IG | 40 | with pressure relief valve | 280 | 90 | 3,80 |
Vdh = conveying volume per double stroke – Pressure (30)= pressure with hand force 30 daN with standard lever
Ordering information
Caution! Remember to order the hand lever HKPAM0290000!
Accessories
- HK PAM Hebel
- Lever for PAM manual pump
- HK PAM Faltenbalg
- Bellows for PAM manual pump
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.