Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK PRRS
3-way pressure reduction valve PRRS
Product image
Properties
| Design |
pilot-controlled |
| Operating pressure |
max. 350 bar |
Description
Setting via setscrew
Note
These valves must be set according to the application.
Tightening torque for valve size 10 with Alu housing: 47-54 Nm
Tightening torque for valve size 10 with Steel housing: 74-81 Nm
Item
Sort upwards
Sort downwards
 Identification |
Setting range min. (bar) |
Setting range max. (bar) |
Pressure max. (bar) |
Volumetric flow max. (L/min) |
Screw-in housing | Screw-in thread | Weight (kg) |
|---|---|---|---|---|---|---|---|
| HK PRRS 10 NS0 06 | 5 | 40 | 350 | 46,0 | HK GEH 38 C1030 | SAE 10/2 7/8"-14UNF-2B | 0,2 |
| HK PRRS 10 NS0 15 | 5 | 100 | 350 | 46,0 | HK GEH 38 C1030 | SAE 10/2 7/8"-14UNF-2B | 0,2 |
| HK PRRS 10 NS0 30 | 5 | 210 | 350 | 46,0 | HK GEH 38 C1030 | SAE 10/2 7/8"-14UNF-2B | 0,2 |
Accessories
- HK GEH 30 AL
- Aluminium housing for SAE 3-way cartridge valve
- HK GEH 30 GGG
- GGG40 housing for SAE 3-way cartridge valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.