Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK STX
Flat cylinders 700 bar single-acting with lock nut
Product image
Properties
| Design |
Hardened valvehead hard chrome-plated pistons max. stroke 50 mm retraction on load with lock nut for positive and safe load holding |
| Operating pressure |
max. 700 bar |
| Material |
Steel |
| Scope of supply |
with female quick coupling 3/8"-18 NPT |
Description
Flat cylinders combine compact design with maximum stroke. Ideal where space is at a premium.
Care must be taken that no lateral forces are transmitted to the guide rings.
Flat, compact design
Plunger wiper seals to prevent soiling
All cylinders have a moving thrust piece and special coating for enhanced corrosion protection.
Note
Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!
Item
Sort upwards
Sort downwards
 Identification |
(kN) |
(t) |
Stroke (mm) |
Area (cm2) |
A (mm) |
B (mm) |
D (mm) |
F | J (mm) |
L (mm) |
Volume (cc) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK STX 05005 | 486,0 | 50 | 50 | 70,8 | 125 | 175 | 120 | Tr 95 x 4 | 21,0 | 92,0 | 355 | 11 |
| HK STX 14004 | 1380,0 | 140 | 45 | 200,9 | 148 | 193 | 205 | Tr 160 x 6 | 38,0 | 147,5 | 905 | 39 |
Accessories
- NY 2100
- Thermoplastic extreme pressure hose
- GKS
- Rubber antikink protection
- PNY 2100 HN
- Swage nipple, AGN
- PHY 2100
- Swage ferrule, NY 2100
- SKL HN SP
- Screwed coupling, loose half
- SKL ZUBS SP
- Dust protection for SKL...SP
- SKF IN SP
- Screwed coupling fixed half
- SKF ZUBS SP
- Dust protection for SKF...SP
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.