PN AFL 90
Swage nipple, DKL angle 90°Product image
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
Connection 1 |
metric nut thread |
Sealing form 1 |
24°/60° Universal sealing head |
Short code |
DKL |
Series |
light |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | for external pipe Ø (mm) |
L1 (mm) |
L2 (mm) |
S1 |
---|---|---|---|---|---|---|---|---|---|
PN 04 AFL 90 | 5 | 3 | 3/16" | 250,0 | M 12 x 1.5 | 6 | 48,5 | 29,0 | 14 |
PN 06 AFL 04 90 | 6 | 4 | 1/4" | 250,0 | M 12 x 1.5 | 6 | 57,0 | 30,5 | 14 |
PN 06 AFL 90 | 6 | 4 | 1/4" | 250,0 | M 14 x 1.5 | 8 | 55,0 | 30,0 | 17 |
PN 06 AFL 08 90 | 6 | 4 | 1/4" | 250,0 | M 16 x 1.5 | 10 | 55,0 | 31,0 | 19 |
PN 06 AFL 10 90 | 6 | 4 | 1/4" | 250,0 | M 18 x 1.5 | 12 | 62,5 | 35,0 | 22 |
PN 08 AFL 90 | 8 | 5 | 5/16" | 250,0 | M 16 x 1.5 | 10 | 58,0 | 30,0 | 19 |
PN 08 AFL 10 90 | 8 | 5 | 5/16" | 250,0 | M 18 x 1.5 | 12 | 58,0 | 30,5 | 22 |
PN 10 AFL 08 90 | 10 | 6 | 3/8" | 250,0 | M 16 x 1.5 | 10 | 63,0 | 38,0 | 19 |
PN 10 AFL 90 | 10 | 6 | 3/8" | 250,0 | M 18 x 1.5 | 12 | 64,0 | 35,0 | 22 |
PN 10 AFL 13 90 | 10 | 6 | 3/8" | 250,0 | M 22 x 1.5 | 15 | 64,0 | 35,5 | 27 |
PN 13 AFL 90 | 12 | 8 | 1/2" | 250,0 | M 22 x 1.5 | 15 | 72,5 | 39,5 | 27 |
PN 13 AFL 16 90 | 12 | 8 | 1/2" | 160,0 | M 26 x 1.5 | 18 | 83,5 | 49,5 | 32 |
PN 16 AFL 13 90 | 16 | 10 | 5/8" | 160,0 | M 22 x 1.5 | 15 | 87,0 | 49,5 | 27 |
PN 16 AFL 90 | 16 | 10 | 5/8" | 160,0 | M 26 x 1.5 | 18 | 88,0 | 49,5 | 32 |
PN 20 AFL 90 | 19 | 12 | 3/4" | 160,0 | M 30 x 2 | 22 | 99,5 | 54,5 | 36 |
PN 25 AFL 90 | 25 | 16 | 1" | 100,0 | M 36 x 2 | 28 | 127,0 | 66,0 | 41 |
PN 32 AFL 90 | 31 | 20 | 1.1/4" | 100,0 | M 45 x 2 | 35 | 151,5 | 82,0 | 50 |
PN 40 AFL 90 | 38 | 24 | 1.1/2" | 100,0 | M 52 x 2 | 42 | 176,5 | 95,0 | 60 |
Product versions
This product is also available in the following designs:
- PN AFL 90 VA
- Swage nipple, DKL angle 90°, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.