PN AOS 45
Swage nipple, DKOS angle 45°Product image
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Short code |
DKOS |
Standard |
ISO 8434-1 |
Series |
heavy |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | for external pipe Ø (mm) |
L1 (mm) |
L2 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|---|---|
PN 04 AOS 45 | 5 | 3 | 3/16" | 630,0 | M 16 x 1.5 | 8 | 56,5 | 15,5 | 19 | 6.0 x 1.5 |
PN 04 AOS 06 45 | 5 | 3 | 3/16" | 630,0 | M 18 x 1.5 | 10 | 58,0 | 17,0 | 22 | 7.0 x 2.0 |
PN 06 AOS 03 45 | 6 | 4 | 1/4" | 630,0 | M 14 x 1.5 | 6 | 64,5 | 16,5 | 17 | 4.0 x 1.5 |
PN 06 AOS 04 45 | 6 | 4 | 1/4" | 630,0 | M 16 x 1.5 | 8 | 64,5 | 16,5 | 19 | 6.0 x 1.5 |
PN 06 AOS 45 | 6 | 4 | 1/4" | 630,0 | M 18 x 1.5 | 10 | 65,0 | 17,0 | 22 | 7.5 x 1.5 |
PN 06 AOS 08 45 | 6 | 4 | 1/4" | 630,0 | M 20 x 1.5 | 12 | 67,5 | 18,0 | 24 | 9.0 x 1.5 |
PN 08 AOS 06 45 | 8 | 5 | 5/16" | 630,0 | M 18 x 1.5 | 10 | 64,0 | 17,0 | 22 | 7.5 x 1.5 |
PN 08 AOS 45 | 8 | 5 | 5/16" | 630,0 | M 20 x 1.5 | 12 | 67,5 | 18,0 | 24 | 9.0 x 1.5 |
PN 10 AOS 06 45 | 10 | 6 | 3/8" | 630,0 | M 18 x 1.5 | 10 | 72,0 | 21,0 | 22 | 7.5 x 1.5 |
PN 10 AOS 08 45 | 10 | 6 | 3/8" | 630,0 | M 20 x 1.5 | 12 | 73,0 | 20,0 | 24 | 9.0 x 1.5 |
PN 10 AOS 45 | 10 | 6 | 3/8" | 630,0 | M 22 x 1.5 | 14 | 73,5 | 20,5 | 27 | 10.0 x 2.0 |
PN 10 AOS 13 45 | 10 | 6 | 3/8" | 420,0 | M 24 x 1.5 | 16 | 81,0 | 21,0 | 30 | 12.0 x 2.0 |
PN 13 AOS 10 45 | 12 | 8 | 1/2" | 420,0 | M 22 x 1.5 | 14 | 81,0 | 27,5 | 27 | 10.0 x 2.0 |
PN 13 AOS 45 | 12 | 8 | 1/2" | 420,0 | M 24 x 1.5 | 16 | 82,0 | 21,0 | 30 | 12.0 x 2.0 |
PN 16 AOS 13 45 | 16 | 10 | 5/8" | 420,0 | M 24 x 1.5 | 16 | 85,5 | 27,5 | 30 | 12.0 x 2.0 |
PN 16 AOS 45 | 16 | 10 | 5/8" | 420,0 | M 30 x 2 | 20 | 98,5 | 27,5 | 36 | 16.0 x 2.5 |
PN 16 AOS 20 45 | 16 | 10 | 5/8" | 420,0 | M 36 x 2 | 25 | 103,0 | 30,5 | 46 | 20.0 x 2.5 |
PN 20 AOS 16 45 | 19 | 12 | 3/4" | 420,0 | M 30 x 2 | 20 | 109,0 | 30,0 | 36 | 16.0 x 2.5 |
PN 20 AOS 45 | 19 | 12 | 3/4" | 420,0 | M 36 x 2 | 25 | 109,5 | 30,5 | 46 | 20.0 x 2.5 |
PN 20 AOS 45 SW41 | 19 | 12 | 3/4" | 420,0 | M 36 x 2 | 25 | 109,5 | 30,5 | 41 | 20.0 x 2.5 |
PN 25 AOS 20 45 | 25 | 16 | 1" | 420,0 | M 36 x 2 | 25 | 141,5 | 39,5 | 46 | 20.0 x 2.5 |
PN 25 AOS 45 | 25 | 16 | 1" | 420,0 | M 42 x 2 | 30 | 135,5 | 33,0 | 50 | 25.0 x 2.5 |
PN 32 AOS 45 | 31 | 20 | 1.1/4" | 345,0 | M 52 x 2 | 38 | 161,5 | 40,5 | 60 | 33.0 x 2.5 |
PN 40 AOS 32 45 | 38 | 24 | 1.1/2" | 345,0 | M 52 x 2 | 38 | 165,0 | 40,5 | 60 | 33.0 x 2.5 |
Product versions
This product is also available in the following designs:
- PN AOS 45 VA
- Swage nipple, DKOS angle 45°, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.