PN AOL VA
Swage nipple, DKOLProduct image
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Short code |
DKOL |
Standard |
ISO 8434-1 |
Series |
light |
Material |
Stainless steel |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | G1 | for external pipe Ø (mm) |
L1 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|
PN 06 AOL 04 VA | 6 | 4 | 1/4" | M 12 x 1.5 | 6 | 50,8 | 14 | 4.0 x 1.5 |
PN 06 AOL VA | 6 | 4 | 1/4" | M 14 x 1.5 | 8 | 54,8 | 17 | 6.0 x 1.5 |
PN 06 AOL 08 VA | 6 | 4 | 1/4" | M 16 x 1.5 | 10 | 56,8 | 19 | 7.5 x 1.5 |
PN 06 AOL 10 VA | 6 | 4 | 1/4" | M 18 x 1.5 | 12 | 57,8 | 22 | 9.0 x 1.5 |
PN 06 AOL 13 VA | 6 | 4 | 1/4" | M 22 x 1.5 | 15 | 58,3 | 27 | 12.0 x 2.0 |
PN 08 AOL 06 VA | 8 | 5 | 5/16" | M 14 x 1.5 | 8 | 51,8 | 17 | 6.0 x 1.5 |
PN 08 AOL VA | 8 | 5 | 5/16" | M 16 x 1.5 | 10 | 55,8 | 19 | 7.5 x 1.5 |
PN 08 AOL 10 VA | 8 | 5 | 5/16" | M 18 x 1.5 | 12 | 57,8 | 22 | 9.0 x 1.5 |
PN 08 AOL 13 VA | 8 | 5 | 5/16" | M 22 x 1.5 | 15 | 58,3 | 27 | 12.0 x 2.0 |
PN 10 AOL 06 VA | 10 | 6 | 3/8" | M 14 x 1.5 | 8 | 58,8 | 17 | 6.0 x 1.5 |
PN 10 AOL 08 VA | 10 | 6 | 3/8" | M 16 x 1.5 | 10 | 55,8 | 19 | 7.5 x 1.5 |
PN 10 AOL VA | 10 | 6 | 3/8" | M 18 x 1.5 | 12 | 55,8 | 22 | 9.0 x 1.5 |
PN 10 AOL 13 VA | 10 | 6 | 3/8" | M 22 x 1.5 | 15 | 55,8 | 27 | 12.0 x 2.0 |
PN 10 AOL 16 VA | 10 | 6 | 3/8" | M 26 x 1.5 | 18 | 53,8 | 32 | 15.0 x 2.0 |
PN 13 AOL 10 VA | 12 | 8 | 1/2" | M 18 x 1.5 | 12 | 57,8 | 22 | 9.0 x 1.5 |
PN 13 AOL VA | 12 | 8 | 1/2" | M 22 x 1.5 | 15 | 58,8 | 27 | 12.0 x 2.0 |
PN 13 AOL 16 VA | 12 | 8 | 1/2" | M 26 x 1.5 | 18 | 59,8 | 32 | 15.0 x 2.0 |
PN 13 AOL 20 VA | 12 | 8 | 1/2" | M 30 x 2 | 22 | 64,3 | 36 | 20.0 x 2.0 |
PN 16 AOL VA | 16 | 10 | 5/8" | M 26 x 1.5 | 18 | 63,5 | 32 | 15.0 x 2.0 |
PN 16 AOL 20 VA | 16 | 10 | 5/8" | M 30 x 2 | 22 | 65,0 | 36 | 20.0 x 2.0 |
PN 16 AOL 25 VA | 16 | 10 | 5/8" | M 36 x 2 | 28 | 67,0 | 41 | 26.0 x 2.0 |
PN 20 AOL 16 VA | 19 | 12 | 3/4" | M 26 x 1.5 | 18 | 69,0 | 32 | 15.0 x 2.0 |
PN 20 AOL VA | 19 | 12 | 3/4" | M 30 x 2 | 22 | 70,0 | 36 | 20.0 x 2.0 |
PN 20 AOL 25 VA | 19 | 12 | 3/4" | M 36 x 2 | 28 | 71,5 | 41 | 26.0 x 2.0 |
PN 25 AOL VA | 25 | 16 | 1" | M 36 x 2 | 28 | 77,0 | 41 | 26.0 x 2.0 |
PN 25 AOL 32 VA | 25 | 16 | 1" | M 45 x 2 | 35 | 85,0 | 50 | 32.0 x 2.5 |
PN 32 AOL VA | 31 | 20 | 1.1/4" | M 45 x 2 | 35 | 99,0 | 50 | 32.0 x 2.5 |
PN 32 AOL 40 VA | 31 | 20 | 1.1/4" | M 52 x 2 | 42 | 104,0 | 60 | 38.0 x 2.5 |
PN 40 AOL VA | 38 | 24 | 1.1/2" | M 52 x 2 | 42 | 99,0 | 60 | 38.0 x 2.5 |
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.