Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
NY 100 PA
Product image
Properties
| Application |
medium high pressure circuits High pressure lubrication lines |
| Special features |
high ozone and abrasion resistance good chemical resistance low volumetric expansion |
| Inner layer |
Polyamide (PA) |
| Insert |
one high tensile steel wire braided insert |
| Outer layer |
Polyurethane |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Elongation |
+ 2 % to - 4 % |
| Media |
Mineral oil Polyglycol based oil Water (0°C to + 60°C) Water-oil emulsions (up to 60°C) |
Note
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| NY 104 PA | 5 | 3 | 3/16" | 5,0 | 9,7 | 360,0 | 1440 | 25 |
| NY 106 PA | 6 | 4 | 1/4" | 6,0 | 11,7 | 300,0 | 1200 | 35 |
| NY 108 PA | 8 | 5 | 5/16" | 8,1 | 13,2 | 250,0 | 1000 | 40 |
| NY 110 PA | 10 | 6 | 3/8" | 10,0 | 15,5 | 225,0 | 900 | 60 |
| NY 113 PA | 12 | 8 | 1/2" | 13,0 | 18,8 | 180,0 | 655 | 70 |
| NY 116 PA | 16 | 10 | 5/8" | 16,3 | 22,0 | 140,0 | 560 | 115 |
| NY 120 PA | 19 | 12 | 3/4" | 19,4 | 25,8 | 115,0 | 460 | 145 |
| NY 125 PA | 25 | 16 | 1" | 25,8 | 33,4 | 95,0 | 380 | 180 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.