Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TBF 200 CU
HD hose, type TBF, copper braid
Product image
Properties
| Application |
Electrically conductive paint spraying hose with high flexibility and low weight |
| Special features |
with copper braid favourable flow properties high resistance to light, weathering, aging, chemical media |
| Inner layer |
Polyamide |
| Insert |
two polyester braided inserts with interwoven copper braid for dissipating electrostatic charge |
| Outer layer |
NW 4: Polyamide; from NW 6: Polyurethane |
| Colour |
black |
| Temp. min. |
-60 °C |
| Temp. max. |
80 °C |
| Elongation |
+ 3 % to - 1 % |
| Media |
Resistant to many technical media particularly the paints and solvents used in paint spraying |
Note
Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) by the employers’ liability insurance association. Follow these guidelines when fitting.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
BD* at 20°C (bar) |
BD* at 50°C (bar) |
BD* at 80°C (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|
| TBF 204 CU | 4 | 3 | 3/16" | 4,0 | 9,2 | 485,0 | 425 | 380 | 40 |
| TBF 206 CU | 6 | 4 | 1/4" | 6,3 | 13,0 | 455,0 | 400 | 360 | 63 |
DN = Nominal diameter, nominal width – BD = Working pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.