Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
NY 800 (R8)
Thermoplastic high pressure hose
Product image
Properties
| Application |
High pressure circuits general application |
| Special features |
high ozone and abrasion resistance no swelling or brittleness when used with solvents or alkaline media very good reverse bending fatigue strength slight volumetric expansion |
| Standard |
SAE 100 R 8, BS 4983, ISO 3949 |
| Inner layer |
Polyester elastomer |
| Insert |
one aramide braided insert |
| Outer layer |
Polyurethane |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Elongation |
+ 3 % to - 3 % |
| Media |
Mineral oil Applications with gaseous or chemical media Synthetic oils Water (0°C to + 60°C) Water-oil emulsions (up to 60°C) |
Note
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| NY 804 | 5 | 3 | 3/16" | 5,0 | 8,9 | 350,0 | 1400 | 30 |
| NY 806 | 6 | 4 | 1/4" | 6,5 | 11,5 | 350,0 | 1400 | 50 |
| NY 808 | 8 | 5 | 5/16" | 8,1 | 13,4 | 300,0 | 1200 | 55 |
| NY 810 | 10 | 6 | 3/8" | 9,7 | 15,5 | 280,0 | 1120 | 60 |
| NY 813 | 12 | 8 | 1/2" | 13,0 | 19,9 | 245,0 | 980 | 80 |
| NY 820 | 19 | 12 | 3/4" | 19,5 | 26,9 | 165,0 | 660 | 150 |
| NY 825 | 25 | 16 | 1" | 25,9 | 34,2 | 140,0 | 560 | 200 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.