WAS STRAHL
Construction water hose
Product image
![WAS STRAHL WAS STRAHL](/data/img/product/WAS_STRAHL.jpg)
Properties
Special features |
highly flexible and sturdy free from LABS, separating agents and grease low flow resistance |
Inner layer |
black, porous, smooth EPDM lining |
Insert |
synthetic threads |
Outer layer |
EPDM resistant to ozone and UV radiation |
Colour |
black |
Temp. min. |
-40 °C |
Temp. max. |
95 °C |
Temp. range |
Temperature peaks up to 110°C |
Media |
Water |
Note
Working pressure is relative to room temperature
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Inches | Internal Ø (mm) |
Wall thickness (mm) |
Operating pressure (bar) |
Min. bending radius (mm) |
Roll length (m) |
---|---|---|---|---|---|---|
WAS 10-3.5 STRAHL | 3/8" | 10 | 3,5 | 20,0 | 60 | 50 |
WAS 13-3 STRAHL | 1/2" | 13 | 3,0 | 20,0 | 80 | 40 |
WAS 16-3.5 STRAHL | 5/8" | 16 | 3,5 | 20,0 | 100 | 40 |
WAS 19-4 STRAHL | 3/4" | 19 | 4,0 | 20,0 | 120 | 40 |
WAS 25-4.5 STRAHL | 1" | 25 | 4,5 | 20,0 | 150 | 40 |
WAS 32-6 STRAHL | 1.1/4" | 32 | 6,0 | 20,0 | 200 | 50 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.