KUEHLER
Radiator hose
Product image

Properties
Application |
Radiator hose |
Standard |
DIN 73411 |
Inner layer |
EPDM |
Insert |
up to ID 19: one polyester braided insert; from ID 20: one Rayon braided insert |
Outer layer |
EPDM (from ID 20 mm patterned material) |
Colour |
black |
Temp. min. |
-40 °C |
Temp. max. |
120 °C |
Media |
Cooling water Cooling fluids |
Item

Sort upwards
Sort downwards
![]() |
ID x Wall thickness | Operating pressure (bar) |
Burst pressure (bar) |
Roll length (m) |
---|---|---|---|---|
KUEHLER 08-3.5 | 8 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 10-3.5 | 10 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 12-3.5 | 12 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 13-3.5 | 13 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 15-3.5 | 15 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 16-3.5 | 16 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 18-3.5 | 18 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 20-3.5 | 20 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 22-3.5 | 22 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 25-3.5 | 25 x 3.5 | 4,0 | 12 | 40 |
KUEHLER 28-4 | 28 x 4 | 4,0 | 12 | 40 |
KUEHLER 30-4 | 30 x 4 | 4,0 | 12 | 40 |
KUEHLER 32-4 | 32 x 4 | 4,0 | 12 | 40 |
KUEHLER 35-4 | 35 x 4 | 4,0 | 12 | 40 |
KUEHLER 38-5 | 38 x 5 | 4,0 | 12 | 40 |
KUEHLER 40-5 | 40 x 5 | 4,0 | 12 | 40 |
KUEHLER 42-5 | 42 x 5 | 4,0 | 12 | 40 |
KUEHLER 45-5 | 45 x 5 | 4,0 | 12 | 40 |
KUEHLER 50-5 | 50 x 5 | 4,0 | 12 | 40 |
KUEHLER 55-5 | 55 x 5 | 4,0 | 12 | 40 |
KUEHLER 60-5 | 60 x 5 | 4,0 | 12 | 40 |
KUEHLER 70-5 | 70 x 5 | 4,0 | 12 | 40 |
KUEHLER 90-6 | 90 x 6 | 4,0 | 12 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.