Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
INDU WAS SD
Suction pressure water hose
Product image
Properties
| Application |
Low pressure suction and pressure systems Industry and construction |
| Standard |
ISO 1307 |
| Inner layer |
Natural and synthetic rubber |
| Insert |
highly tear-resistant synthetic textile insert and steel wire spiral |
| Outer layer |
synthetic rubber |
| Colour |
black |
| Temp. min. |
-25 °C |
| Temp. max. |
70 °C |
| Media |
Water |
Item
Sort upwards
Sort downwards
 Identification |
Inches | Internal Ø (mm) |
External Ø (mm) |
Wall thickness (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
Roll length (m) |
|---|---|---|---|---|---|---|---|---|---|
| INDU WAS 25-5 SD | 1" | 25,4 | 35 | 5,0 | 10,0 | 30 | 0,93 | 153 | 40 |
| INDU WAS 32-5 SD | 1.1/4" | 32,0 | 42 | 5,0 | 10,0 | 30 | 0,93 | 192 | 40 |
| INDU WAS 38-5 SD | 1.1/2" | 38,0 | 48 | 5,0 | 10,0 | 30 | 0,93 | 228 | 40 |
| INDU WAS 45-5 SD | 1.3/4" | 44,5 | 55 | 5,0 | 10,0 | 30 | 0,93 | 267 | 40 |
| INDU WAS 51-5.5 SD | 2" | 51,0 | 62 | 5,5 | 10,0 | 30 | 0,93 | 306 | 40 |
| INDU WAS 63-6 SD | 2.1/2" | 63,5 | 75 | 6,0 | 10,0 | 30 | 0,93 | 381 | 40 |
| INDU WAS 70-8 SD | 2.3/4" | 70,0 | 86 | 8,0 | 10,0 | 30 | 0,93 | 420 | 40 |
| INDU WAS 76-6.5 SD | 3" | 75,0 | 89 | 7,0 | 10,0 | 30 | 0,93 | 458 | 40 |
| INDU WAS 102-6.5 SD | 4" | 101,6 | 115 | 6,5 | 10,0 | 30 | 0,93 | 610 | 40 |
| INDU WAS 127-8.5 SD | 5" | 127,0 | 144 | 8,5 | 10,0 | 30 | 0,93 | 762 | 40 |
| INDU WAS 152-8.5 SD | 6" | 152,4 | 169 | 8,5 | 10,0 | 30 | 0,93 | 915 | 40 |
| INDU WAS 203-10.5 SD | 8" | 203,2 | 224 | 10,5 | 10,0 | 30 | 0,93 | 1219 | 40 |
| INDU WAS 254-16 SD | 10" | 254,0 | 275 | 16,0 | 10,0 | 30 | 0,93 | 1524 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.