STOP FS
Stopflex hose clampProduct image
Properties
Application |
Personal protection against whipping hose |
Inner layer |
Steel and rubber |
Surface |
electro galvanised |
Description
High tensile steel clip with rubber insert for fitting on the hose.
Item
Sort upwards
Sort downwards
Identification | Clamping range (mm) | Fixing bolt |
---|---|---|
STOP FS 11 11.5 | 11 - 11,9 | M 6 |
STOP FS 12 12.5 | 12 - 12,9 | M 6 |
STOP FS 13 13.5 | 13 - 13,9 | M 6 |
STOP FS 14 15 | 14 - 15,5 | M 6 |
STOP FS 16 17 | 16 - 17,9 | M 6 |
STOP FS 17 18 | 17 - 18,9 | M 6 |
STOP FS 18 19 | 18 - 19,9 | M 6 |
STOP FS 20 21 | 20 - 21,9 | M 6 |
STOP FS 21 22 | 21 - 22,9 | M 6 |
STOP FS 22 23 | 22 - 23,9 | M 6 |
STOP FS 24 25 | 24 - 25,9 | M 6 |
STOP FS 25 26 | 25 - 26,9 | M 6 |
STOP FS 26 27 | 26 - 27,9 | M 6 |
STOP FS 27 28 | 27 - 28,9 | M 6 |
STOP FS 28 29 | 28 - 29,9 | M 6 |
STOP FS 30 31 | 30 - 31,9 | M 6 |
STOP FS 32 33 | 32 - 33,9 | M 6 |
STOP FS 34 35 | 34 - 35,9 | M 6 |
STOP FS 36 37 | 36 - 37,9 | M 6 |
STOP FS 38 39 | 38 - 39,9 | M 6 |
STOP FS 39 40 | 39 - 40,9 | M 6 |
STOP FS 40 41 | 40 - 41,9 | M 6 |
STOP FS 42 43 | 42 - 43,9 | M 6 |
STOP FS 43 44 | 43 - 44,9 | M 6 |
STOP FS 44 45 | 44 - 45,9 | M 6 |
STOP FS 45 47 | 45 - 47,9 | M 8 |
STOP FS 48 50 | 48 - 50,9 | M 8 |
STOP FS 51 53 | 51 - 53,9 | M 8 |
STOP FS 53 54 | 53 - 54,9 | M 8 |
STOP FS 54 56 | 54 - 56,9 | M 8 |
STOP FS 57 59 | 57 - 59,9 | M 8 |
STOP FS 60 62 | 60 - 62,9 | M 8 |
STOP FS 63 65 | 63 - 65,9 | M 8 |
STOP FS 66 68 | 66 - 68,9 | M 8 |
STOP FS 69 71 | 69 - 71,9 | M 8 |
STOP FS 72 74 | 72 - 74,9 | M 8 |
STOP FS 75 77 | 75 - 77,9 | M 8 |
STOP FS 78 80 | 78 - 80,9 | M 8 |
STOP FS 81 83 | 81 - 83,9 | M 8 |
STOP FS 84 86 | 84 - 86,9 | M 8 |
STOP FS 87 89 | 87 - 89,9 | M 8 |
STOP FS 90 92 | 90 - 92,9 | M 8 |
STOP FS 93 95 | 93 - 95,6 | M 8 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.