Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK NTM
Level/temperature switch HK NTM
Product image
Properties
| Operating pressure |
max. 1 bar |
| Operating temperature max. |
80 °C |
| Connection |
G 3/4" male |
| Operating voltage |
max. 230V AC |
| Electrical connection |
Device connector M3 (3-polig) |
| Protection IP |
IP 65 |
| Material |
Float SK 601 - hard PU Switching tube - brass Gasket: NBR |
| Hysteresis |
± 5 K |
Description
One permanently set switching point (NC contact) for level and temperature
Item
Sort upwards
Sort downwards
 Identification |
L (mm) |
Switching point (°C) |
Switching point (mm) |
Weight (kg) |
|---|---|---|---|---|
| HK NTM M3 140 60NC 280 | 280 | 60 | 140 | 0,30 |
| HK NTM M3 140 70NC 280 | 280 | 70 | 140 | 0,30 |
| HK NTM M3 140 80NC 280 | 280 | 80 | 140 | 0,30 |
| HK NTM M3 190 60NC 280 | 280 | 60 | 190 | 0,30 |
| HK NTM M3 190 70NC 280 | 280 | 70 | 190 | 0,30 |
| HK NTM M3 190 80NC 280 | 280 | 80 | 190 | 0,30 |
| HK NTM M3 320 60NC 370 | 370 | 60 | 320 | 0,40 |
| HK NTM M3 320 70NC 370 | 370 | 70 | 320 | 0,40 |
| HK NTM M3 320 80NC 370 | 370 | 80 | 320 | 0,40 |
Switching point (°C) = temperature switching point – Switching point (mm) = level switching point
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.