HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK 64EJ

Level/temperature switch HK 64EJ
Hide product imageProduct image
HK 64EJ data/img/product/HK 64EJ Abmessung.gif - HK 64EJ
Hide propertiesProperties
Operating pressure max. 1 bar
Operating temperature max. 80 °C
Connection bolt hole Ø 73 mm
Electrical connection Device connector S6 DIN EN 175201-804
Material Float SK 601 - hard PU
Switching tube - brass
Flange - PA
Scope of supply incl. seal and screw set
incl. connector
Hide descriptionDescription

Freely combinable kit for level and temperature switches
Cable-free, adjustable level contact
Can be installed as NO or NC contact
Simple retrofitting for temperature monitoring
Bistable = only one float switch with high float dynamics
Maintenance-free
Density of fluid min. 0.8 kg/dm3

Hide informationNote

Basic unit comprises:
Level switch for tank installation with float and S6 plug
1x adjustable level contact K101-green, installed as NC contact
Installation and assembly must be carried out by qualified staff. Level contacts or temperature sensors must be connected to the contact plate clean and free of oil.
For the proper function of the temperature sensors it is important that they have contact to the bottom of the dip tube without air gap. Make sure that the contact plate is inserted completely and fixed in the dip tube.

Hide product tableItem

Sort upwards

Sort downwards

Hide product accessoriesAccessories
HK LK EJ
Level contact for level/temperature switch
HK TKO / TKS
Temperature contact for level/temperature switch
HK KL EJ
Resistance thermometer for level/temperature switch
HK THERMO EJ
Temperature transmitter for level/temperature switch
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.