Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK 64EJ
Level/temperature switch HK 64EJ
Product image
Properties
| Operating pressure |
max. 1 bar |
| Operating temperature max. |
80 °C |
| Connection |
bolt hole Ø 73 mm |
| Electrical connection |
Device connector S6 DIN EN 175201-804 |
| Material |
Float SK 601 - hard PU Switching tube - brass Flange - PA |
| Scope of supply |
incl. seal and screw set incl. connector |
Description
Freely combinable kit for level and temperature switches
Cable-free, adjustable level contact
Can be installed as NO or NC contact
Simple retrofitting for temperature monitoring
Bistable = only one float switch with high float dynamics
Maintenance-free
Density of fluid min. 0.8 kg/dm3
Note
Basic unit comprises:
Level switch for tank installation with float and S6 plug
1x adjustable level contact K101-green, installed as NC contact
Installation and assembly must be carried out by qualified staff.
Level contacts or temperature sensors must be connected to the contact plate clean and free of oil.
For the proper function of the temperature sensors it is important that they have contact to the bottom of the dip tube without air gap. Make sure that the contact plate is inserted completely and fixed in the dip tube.
Item
Sort upwards
Sort downwards
 Identification |
L (mm) |
Weight (kg) |
|---|---|---|
| HK 64EJ K101 S6 250 | 250 | 0,3 |
| HK 64EJ K101 S6 370 | 370 | 0,3 |
| HK 64EJ K101 S6 520 | 520 | 0,4 |
Accessories
- HK LK EJ
- Level contact for level/temperature switch
- HK TKO / TKS
- Temperature contact for level/temperature switch
- HK KL EJ
- Resistance thermometer for level/temperature switch
- HK THERMO EJ
- Temperature transmitter for level/temperature switch
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.