Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK TKO / TKS
Temperature contact for level/temperature switch
Product image
Properties
| Contact load max. |
24 VA |
| Switching current max. |
1,0 A |
| Hysteresis |
10 K ± 3 K |
| Use |
for Level-Temperature Switches HK 64EJ |
Description
For mounting on contact strip of level-temperature switch HK64EJ
Note
Installation and assembly must be carried out by qualified staff.
Level contacts or temperature sensors must be connected to the contact plate clean and free of oil.
For the proper function of the temperature sensors it is important that they have contact to the bottom of the dip tube without air gap. Make sure that the contact plate is inserted completely and fixed in the dip tube.
Item
Sort upwards
Sort downwards
 Identification |
Switching point (°C) |
Voltage | Switching function | Weight (kg) |
|---|---|---|---|---|
| HK TKO 50 RD EJ | 50 | 24 V | NC contact | 0,01 |
| HK TKO 60 RD EJ | 60 | 24 V | NC contact | 0,01 |
| HK TKO 70 RD EJ | 70 | 24 V | NC contact | 0,01 |
| HK TKO 80 RD EJ | 80 | 24 V | NC contact | 0,01 |
| HK TKS 50 RD EJ | 50 | 24 V | NO contact | 0,01 |
| HK TKS 60 RD EJ | 60 | 24 V | NO contact | 0,01 |
| HK TKS 70 RD EJ | 70 | 24 V | NO contact | 0,01 |
| HK TKS 80 RD EJ | 80 | 24 V | NO contact | 0,01 |
Accessory for following products
- HK 64EJ
- Level/temperature switch HK 64EJ
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.