Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK KM 202
Counter nut
Product image
Properties
| Use |
For control panel installation of valves HKV257 2 and HK V257 5 |
Description
Installation: Release the lock of the handwheel
Loosen slotted screw under the PVC cap
Remove handwheel
Install valve using the lock nut
Item
Sort upwards
Sort downwards
 Identification |
Thread | for valve size | Weight (kg) |
|---|---|---|---|
| HK KM 202-1/8 | M 17 x 1 | 1/8" | 0,02 |
| HK KM 202-1/4 | M 20 x 1 | 1/4" | 0,04 |
| HK KM 202-3/8 | M 25 x 1.5 | 3/8" | 0,06 |
| HK KM 202-1/2 | M 30 x 1.5 | 1/2" | 0,08 |
| HK KM 202-3/4 | M 40 x 1.5 | 3/4" | 0,10 |
| HK KM 202-1 | M 50 x 1.5 | 1" | 0,12 |
| HK KM 202-11/4 | M 50 x 1.5 | 1.1/4" | 0,14 |
| HK KM 202-11/2 | M 55 x 2 | 1.1/2" | 0,16 |
| HK KM 202-2 | M 65 x 2 | 2" | 0,18 |
Accessory for following products
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.