Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK V2 190
V2190 lowering valve
Product image
Properties
| Design |
single-acting |
| Material |
Housing: Galvanised steel Inside parts of steel |
| Operating pressure |
max. 350 bar |
Note
When using these valve with a plunger cylinder, an additional pressure relief valve must be installed in the V1 line that has to be matched to the load pressure of the cylinder. This pressure relief valve must discharge to the tank.
These rate-of-drop valves must be set according to the application.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Q max. (L/min) |
Level control ratio | H (mm) |
L (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
S (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| HK V2 190 A600 | G 3/8” | 40 | 1:4 | 60 | 100 | 148 | 30 | 60 | 30 | 1,21 |
| HK V2 190 A800 | G 1/2” | 60 | 1:4 | 60 | 100 | 148 | 35 | 65 | 30 | 1,15 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.