Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK VRDE
VRDE non-return valve for cylinder installation
Product image
Properties
| Design |
Cone locking pilot-controlled - double-acting Direct flange mounting on cylinder |
| Scope of supply |
incl. hollow screw and gaskets |
| Material |
Steel housing |
| Operating pressure |
max. 300 bar |
Note
Recommended minimum distance of cylinder oil connections: 144 mm for HK VRDE 10 CIL / 150 mm for HK VRDE 20 CIL
Item
Sort upwards
Sort downwards
 Identification |
Opening pressure (bar) |
Level control ratio | Q max. (L/min) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
Connection A1, A2, B1 | Hollow screw B2 | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK VRDE 10 CIL | 0,6 | 1:4.5 | 20 | 88,5 | 84 | 68,5 | 24 | 40 | 27 | 10 | G 1/4” - IG | 1/4" AG | 0,62 |
| HK VRDE 20 CIL | 0,6 | 1:4.9 | 20 | 90,5 | 86 | 72,0 | 26 | 45 | 31 | 12 | G 3/8” - IG | 3/8" AG | 0,62 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.