Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK REM
Pressure relief valve with SAE connector
Product image
Properties
| Design |
SAE flange connector (e.g. for direct fitting to pumps) |
| Scope of supply |
incl. SAE flanges and M10 screws |
| Operating pressure |
max. 350 bar |
Description
Pilot-controlled pressure relief valve with damping plunger
Version with solenoid relief valve for pressure-free circulation of the pump see HK REM 24
Max. volumetric flow 600 l/min
For mineral- based hydraulic oil or synthetic fluids with comparable properties
Item
Sort upwards
Sort downwards
 Identification |
Connection | Pressure setting range min. (bar) |
Pressure setting range max. (bar) |
Volumetric flow max. (L/min) |
Weight (kg) |
|---|---|---|---|---|---|
| HK REM 3 350 | SAE flange 3/4" | 8 | 350 | 200,0 | 6,6 |
| HK REM 4 210 | SAE flange 1" | 7 | 210 | 400,0 | 6,8 |
| HK REM 5 210 | SAE flange 1.1/4" | 7 | 210 | 600,0 | 8,2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.