Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK REM 24
Pressure relief valve with SAE connection and relief valve
Product image
Properties
| Design |
SAE flange connector (e.g. for direct fitting to pumps) with magnetic relief valve 24 V; relief with magnet at zero current |
| Scope of supply |
incl. SAE flanges and M10 screws |
| Operating pressure |
max. 350 bar |
Description
Pilot-controlled pressure relief valve with damping plunger
2 pressure adjustment ranges (same min / max values)
Max. volumetric flow 600 l/min
For mineral- based hydraulic oil or synthetic fluids with comparable properties
Note
These valves must be set according to the application.
Item
Sort upwards
Sort downwards
 Identification |
Connection | Pressure setting range min. (bar) |
Pressure setting range max. (bar) |
Volumetric flow max. (L/min) |
Weight (kg) |
|---|---|---|---|---|---|
| HK REM 3 20 350 350 24 | SAE flange 3/4" | 8 | 350 | 200,0 | 9,2 |
| HK REM 4 20 210 210 24 | SAE flange 1" | 7 | 210 | 400,0 | 9,2 |
| HK REM 5 20 210 210 24 | SAE flange 1.1/4" | 7 | 210 | 600,0 | 9,2 |
Accessories
- HK SP DIN 43650
- Electrical plug for solenoid coil DIN 43650 / ISO 4400
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.