Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI REGL H ABLV VA
Filter regulators
Product image
Properties
| Input pressure |
Max. 30 bar |
| Media temperature |
max. 130 °C |
| Ambient temperature |
Max. 60 °C |
| Flow rate |
2500 l/min |
| Pore size in filter element |
50 μm |
| Sealant |
FKM |
| Diaphragm |
PTFE on NBR base |
| Material |
stainless steel 1.4404 (AISI 316L) |
| Drain valve |
Manual drain valve |
| Flow rate measurement |
At P1 = 10 bar, P2 = 5 bar and pressure drop Δp ≤ 1 bar |
Description
Stainless steel filter regulators with self-relieving (not for liquid media) containing no non-ferrous metals for use in the food processing, chemical, mining, plant construction and special machinery industries as well as in the medical technology.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | A (mm) |
B | C (mm) |
|---|---|---|---|---|---|
| K- 07 25 06 52 | G 1/4 | 1.0 - 15.0 bar | 65,0 | 250.0 mm | 125,0 |
| K- 07 25 06 51 | G 1/2 | 1.0 - 15.0 bar | 80,0 | 260.0 mm | 127,0 |
Ordering information
With filter element 5 μm available on request. Without self-relieving design (for liquids) available on request. With semi- or fully automatic drain valve on request. With NPT threads available on request.
Spare parts
- K-HALTERBAUSATZ EDELSTAHL
- Holder
- K-MANO
- Pressure gauges (CrNi steel type / connection on rear)
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.