KS AL
Clamp ring fitting, aluminiumProduct image
Properties
Application |
Integrating clamp ring fittings with hose |
Standard |
DIN 2817 |
Design |
Clamping shells |
Scope of supply |
Clamping halves, loose, incl. screws and nuts |
Material |
Aluminium forged |
Item
Sort upwards
Sort downwards
Identification | for hose | Clamping range (mm) | DN* | Max. working pressure (bar) |
b (mm) |
h (mm) |
Screws |
---|---|---|---|---|---|---|---|
KS 22-24 AL | 13 x 5 | 22 - 24 | 19 | 25 | 51 | 50 | (4 x) M 6 x 20 |
KS 30-33 AL | 19 x 6 | 30 - 33 | 20 | 25 | 63 | 50 | (4 x) M 6 x 20 |
KS 34-36 AL | 25 x 5 | 25 | 25 | 70 | 64 | (4 x) M 8 x 25 | |
KS 36-39 AL | 25 x 6 | 36 - 39 | 25 | 25 | 69 | 50 | (4 x) M 6 x 20 |
KS 40-43 AL | 25 x 8 | 40 - 43 | 25 | 25 | 73 | 50 | (4 x) M 6 x 20 |
KS 43-46 AL | 32 x 6 | 43 - 46 | 32 | 25 | 76 | 50 | (4 x) M 6 x 20 |
KS 47-51 AL | 38 x 5 | 47 - 51 | 40 | 25 | 79 | 50 | (4 x) M 6 x 20 |
KS 50-53 AL | 38 x 6.5 | 50 - 53 | 40 | 25 | 83 | 50 | (4 x) M 6 x 20 |
KS 53-56 AL | 38 x 8 | 53 - 56 | 40 | 25 | 85 | 50 | (4 x) M 6 x 20 |
KS 58-61 AL | 40 x 10 | 40 | 25 | 98 | 57 | (4 x) M 8 x 25 | |
KS 60-64 AL | 50 x 5.5 | 60 - 64 | 51 | 25 | 95 | 56 | (4 x) M 8 x 25 |
KS 63-67 AL | 50 x 8 | 63 - 67 | 51 | 25 | 102 | 56 | (4 x) M 8 x 25 |
KS 74-77 AL | 63 x 6 | 74 - 77 | 63 | 25 | 120 | 74 | (4 x) M 10 x 40 |
KS 78-82 AL | 63 x 8 | 78 - 82 | 63 | 25 | 120 | 74 | (4 x) M 8 x 25 |
KS 85-89 AL | 75 x 6 | 76 | 25 | 141 | 102 | (4 x) M 10 x 40 | |
KS 89-93 AL | 75 x 8 | 89 - 93 | 76 | 25 | 132 | 76 | (4 x) M 8 x 25 |
KS 94-97 AL | 75 x 10 | 94 - 97 | 76 | 25 | 140 | 76 | (4 x) M 8 x 25 |
KS 111-115 AL | 100 x 6.5 | 111 - 115 | 100 | 25 | - | 120 | - |
KS 114-119 AL | 100 x 8 | 114 - 119 | 100 | 25 | 166 | 120 | (4 x) M 10 x 40 |
KS 118-122 AL | 100 x 10 | 118 - 122 | 100 | 25 | 170 | 120 | (4 x) M 10 x 40 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.