KT UEM
Conical nozzle with union nut
Product image
![KT UEM KT UEM](/data/img/product/KT_UEM und RD.jpg)
Properties
Application |
in construction, mining and tunnel building |
Connection 1 |
BSP nut thread |
Sealing form 1 |
Outer cone |
Connection 2 |
Hose connection |
Standard |
DIN 8537 / 20 033 |
Scope of supply |
Union nut and conical nozzle |
Temp. min. |
-40 °C |
Temp. max. |
95 °C |
Media |
Compressed air, water |
Material |
Steel Malleable cast iron |
Surface |
electro galvanised |
Note
To be integrated with DIN 20039 B hose clamps.
Conical nozzles 1:3 cone generally with additional O-ring seal.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
for hose ID (mm) |
G1 | Ø ID (mm) |
Length (mm) |
b (mm) |
Cone | Ø Safety collar (mm) |
Operating pressure |
---|---|---|---|---|---|---|---|---|
KT UEM 3/4-10 MM | 10 | G 3/4" -14 | 8,00 | 70 | 58 | 1:4 | 21 | PN 25 |
KT UEM 3/4-13 MM | 13 | G 3/4" -14 | 10,00 | 79 | 58 | 1:4 | 21 | PN 25 |
KT UEM 3/4-15 MM | 15 | G 3/4" -14 | 12,00 | 79 | 58 | 1:4 | 26 | PN 25 |
KT UEM 3/4-19 MM | 19 | G 3/4" -14 | 13,00 | 80 | 58 | 1:4 | 33 | PN 25 |
KT UEM 1-10 MM | 10 | G 1" -11 | 7,50 | 83 | 65 | 1:3 | 21 | PN 25 |
KT UEM 1-13 MM | 13 | G 1" -11 | 10,00 | 85 | 65 | 1:3 | 22 | PN 25 |
KT UEM 1-15 MM | 15 | G 1" -11 | 12,00 | 85 | 65 | 1:3 | 26 | PN 25 |
KT UEM 1-19 MM | 19 | G 1" -11 | 15,00 | 85 | 65 | 1:3 | 33 | PN 25 |
KT UEM 1-25 MM | 25 | G 1" -11 | 16,00 | 90 | 65 | 1:3 | 38 | PN 25 |
G1 = Thread of connection 1 – Ø ID = Through hole
Spare parts
![](/images/up.gif)
- UEM KT
- Union nut for conical nozzles
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.