Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-VORFI PC-BEHAELTER MULTIFIX MINI
Pre-filters with polycarbonate bowl
Product image
Properties
| Input pressure |
Max. 16 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Filter rating |
0,30 μm |
| Efficiency |
99.999 % |
| Sealant |
NBR |
| Filter insert |
Paper-POM |
| Housing |
Die-cast zinc |
| Drain valve |
Semi-automatic |
| Flow rate measurement |
FV at P1 = 6 bar and pressure drop Δp = 0.02 bar |
Description
Micro-filters for compliance with strict compressed air purity requirements. Suitable for all applications where standard filters do not afford the desired efficiency.
Note
If several devices in the »multifix-mini« Series are assembled together, the maximum working pressure is 12 bar.
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
|---|---|---|---|---|---|---|---|
| K- 07 25 10 64 | G 1/8 | 130 | 40,0 | 114.8 mm | 12,3 | 102,5 | 5 |
| K- 07 25 10 66 | G 1/4 | 160 | 40,0 | 138.1 mm | 12,3 | 125,8 | 5 |
Spare parts
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
- K-KOPPELPAKET MEHR
- Coupling packet
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.