Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH 3-TLG PC MONO STANDARD-MINI
Service units, 3-piece with polycarbonate bowl and pressure gauge
Product image
Properties
| Input pressure |
Max. 16 bar (polycarbonate bowl), Max. 25 bar (metal bowl) |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Flow rate |
350 l/min (2-piece), 300 l/min (3-piece) |
| Pore size in filter element |
5 μm |
| Sealant |
NBR |
| Housing |
Die-cast zinc, painted silver |
| Dropper |
PA (polycarbonate bowl), Zinc-glass-NBR (metal bowl) |
| Drain valve |
Semi-automatic for variant with polycarbonate bowl, Manual for variant with metal bowl |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Compact, two or three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | A (mm) |
B | C (mm) |
D (mm) |
DN |
|---|---|---|---|---|---|---|---|
| K- 07 25 14 52 | G 1/8 | 0.5 - 10 bar | 130,0 | 151.5 mm | 49,5 | 102,0 | 5 |
| K- 07 25 14 54 | G 1/4 | 0.5 - 10 bar | 130,0 | 151.5 mm | 49,5 | 102,0 | 5 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-ERSATZBEHAELTER MULTI MINI
- Spare tank »multifix-mini« & »standard-mini«
- K-PC-BEHAELTER FILTER MULTIFIX
- Polycarbonate tank filter
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-FILTERELEMENT
- Filter element
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
- K-TROPFAUFSATZ POLYCARBO
- Drip attachment polycarbonate
- K-TROPFAUFSATZ METALL
- Drip attachment metal
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
- K-XV AGM MS NI
- Double nipples, parallel male thread, nickel-plated brass
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.