Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PAY 300 SF6 45
Swage fitting, SFS angle 45°
Product image
Properties
| Connection 1 |
SAE flange connection 6000 PSI |
| Sealing form 1 |
flat seal with SF O-ring |
| Short code |
SFS |
| Standard |
SAE J518 ISO 6162-2 |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Flange size | D (mm) |
H (mm) |
L1 (mm) |
L2 (mm) |
|---|---|---|---|---|---|---|---|---|
| PAY 313 SF6 45 | 12 | 8 | 1/2" | 1/2" | 31,8 | 7,7 | 95,0 | 21,0 |
| PAY 316 SF6 20 45 | 16 | 10 | 5/8" | 3/4" | 41,3 | 8,8 | 117,5 | 28,0 |
| PAY 320 SF6 45 | 19 | 12 | 3/4" | 3/4" | 41,3 | 8,8 | 130,5 | 32,0 |
| PAY 325 SF6 45 | 25 | 16 | 1" | 1" | 47,6 | 9,5 | 130,0 | 37,0 |
| PAY 332 SF6 45 | 31 | 20 | 1.1/4" | 1.1/4" | 54,0 | 10,3 | 180,5 | 44,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.