PHN 200
Swage ferrule for braided hose
Product image
![PHN 200 PHN 200](/data/img/product/PHN_200.jpg)
![PHN 200 - data/img/product/PHN_200_Zeichnung.jpg data/img/product/PHN_200_Zeichnung.jpg - PHN 200](/data/img/product/PHN_200_Zeichnung.jpg)
Properties
Ferrule type |
Non-skive ferrule |
suitable for |
1SN (HD 100) 2SN (HD 200) 2SC (KP 200) |
Material |
Steel |
Surface |
electro galvanised |
Note
The ferrule assignment depends on the hose type.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN* | Size | Inches | D1 (mm) |
D3 (mm) |
LF (mm) |
---|---|---|---|---|---|---|
PHN 204 | 5 | 3 | 3/16" | 21,0 | 9,5 | 23,5 |
PHN 206 | 6 | 4 | 1/4" | 23,0 | 11,4 | 30,0 |
PHN 208 | 8 | 5 | 5/16" | 24,0 | 13,2 | 30,0 |
PHN 210 | 10 | 6 | 3/8" | 26,0 | 14,5 | 31,0 |
PHN 213 | 12 | 8 | 1/2" | 29,0 | 18,3 | 32,0 |
PHN 216 | 16 | 10 | 5/8" | 33,0 | 21,6 | 36,0 |
PHN 220 | 19 | 12 | 3/4" | 37,0 | 24,4 | 42,5 |
PHN 225 | 25 | 16 | 1" | 46,0 | 31,0 | 51,0 |
PHN 232 | 31 | 20 | 1.1/4" | 59,0 | 38,3 | 57,5 |
PHN 240 | 38 | 24 | 1.1/2" | 67,0 | 44,0 | 60,5 |
PHN 250 | 51 | 32 | 2" | 80,0 | 57,0 | 74,0 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.