Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PHT
Pressed holder for textile braid hose
Product image
Properties
| Ferrule type |
Non-skive ferrule |
| suitable for |
2TE (TE 200, TE 200B,) 3TE (TE 300) SI 200 RME |
| Material |
Steel |
| Surface |
electro galvanised |
Note
The ferrule assignment depends on the hose type.
PHT204 for 2TE (TE200, TE200B)
PHT304 for 3TE (TE300)
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | D1 (mm) |
D3 (mm) |
LF (mm) |
|---|---|---|---|---|---|---|
| PHT 204 | 5 | 3 | 3/16" | 17,0 | 9,8 | 27,3 |
| PHT 304 | 5 | 3 | 3/16" | 18,6 | 9,8 | 27,3 |
| PHT 06 | 6 | 4 | 1/4" | 19,0 | 11,6 | 28,0 |
| PHT 08 | 8 | 5 | 5/16" | 22,3 | 12,6 | 30,2 |
| PHT 10 | 10 | 6 | 3/8" | 23,0 | 14,9 | 29,5 |
| PHT 13 | 12 | 8 | 1/2" | 27,0 | 18,5 | 31,0 |
| PHT 16 | 16 | 10 | 5/8" | 32,0 | 21,8 | 33,0 |
| PHT 20 | 19 | 12 | 3/4" | 35,0 | 24,6 | 37,5 |
| PHT 25 | 25 | 16 | 1" | 42,0 | 30,8 | 45,5 |
| PHT 32 | 31 | 20 | 1.1/4" | 48,0 | 37,9 | 55,0 |
| PHT 40 | 38 | 24 | 1.1/2" | 57,2 | 44,2 | 63,2 |
| PHT 50 | 51 | 32 | 2" | 76,0 | 56,8 | 78,5 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.