VHR 90 ED
Blanking screw with hexagon socket
Product image
![VHR 90 ED VHR 90 ED](/data/img/product/VHM_90_ED_FOTO_N.jpg)
![VHR 90 ED - data/img/product/VHM_90_ED_Zeich.jpg data/img/product/VHM_90_ED_Zeich.jpg - VHR 90 ED](/data/img/product/VHM_90_ED_Zeich.jpg)
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
Shape E |
Design |
Blanking screw with hexagon socket |
Construction |
straight |
Material |
Steel |
Surface |
electro galvanised |
Note
Also available without seal as FHR.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Operating pressure | G | D (mm) |
i (mm) |
l (mm) |
S (mm) |
---|---|---|---|---|---|---|
VHR 90-1/8 ED | PN 400 | G 1/8" -28 | 14 | 8 | 12,0 | 5 |
VHR 90-1/4 ED | PN 400 | G 1/4" -19 | 19 | 12 | 17,0 | 6 |
VHR 90-3/8 ED | PN 400 | G 3/8" -19 | 22 | 12 | 17,0 | 8 |
VHR 90-1/2 ED | PN 400 | G 1/2" -14 | 27 | 14 | 19,0 | 10 |
VHR 90-3/4 ED | PN 400 | G 3/4" -14 | 32 | 16 | 21,0 | 12 |
VHR 90-1 ED | PN 400 | G 1" -11 | 40 | 16 | 22,5 | 17 |
VHR 90-1 1/4 ED | PN 315 | G 1.1/4" -11 | 50 | 16 | 22,5 | 22 |
VHR 90-1 1/2 ED | PN 315 | G 1.1/2" -11 | 55 | 16 | 22,5 | 24 |
VHR 90-2 ED | PN 315 | G 2" -11 | 72 | 24 | 34,5 | 32 |
PN = Nominal pressure PB = Max. operating pressure
Spare parts
![](/images/up.gif)
- WD
- Soft seal for ED fittings
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- VHR 90 ED VA
- Blanking screw with hexagon socket, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.