VLM / VSM
Blanking nut
Product image
![VLM / VSM VLM / VSM](/data/img/product/VLM+VSM+FFM.jpg)
![VLM / VSM - data/img/product/VLM+VSM_MEx.gif data/img/product/VLM+VSM_MEx.gif - VLM / VSM](/data/img/product/VLM+VSM_MEx.gif)
Properties
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Design |
Blanking nut |
Construction |
straight |
Standard |
DIN 2353 ISO 8434-1 |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Series | Operating pressure | External pipe Ø (mm) |
M | l (mm) |
AF (mm) |
OR |
---|---|---|---|---|---|---|---|
VLM NW 04 | L | PN 400 | 6 | M 12 x 1.5 | 18,5 | 14 | 4.0 x 1.5 |
VLM NW 06 | L | PN 400 | 8 | M 14 x 1.5 | 18,0 | 17 | 6.0 x 1.5 |
VLM NW 08 | L | PN 400 | 10 | M 16 x 1.5 | 19,5 | 19 | 7.5 x 1.5 |
VLM NW 10 | L | PN 400 | 12 | M 18 x 1.5 | 19,0 | 22 | 9.0 x 1.5 |
VLM NW 13 | L | PN 400 | 15 | M 22 x 1.5 | 19,0 | 27 | 12.0 x 2.0 |
VLM NW 16 | L | PN 315 | 18 | M 26 x 1.5 | 22,0 | 32 | 15.0 x 2.0 |
VLM NW 20 | L | PN 315 | 22 | M 30 x 2 | 22,0 | 36 | 20.0 x 2.0 |
VLM NW 25 | L | PN 250 | 28 | M 36 x 2 | 23,5 | 41 | 26.0 x 2.0 |
VLM NW 32 | L | PN 250 | 35 | M 45 x 2 | 27,0 | 50 | 32.0 x 2.5 |
VLM NW 40 | L | PN 250 | 42 | M 52 x 2 | 27,5 | 60 | 38.0 x 2.5 |
VSM NW 03 | S | PN 630 | 6 | M 14 x 1.5 | 18,5 | 17 | 4.0 x 1.5 |
VSM NW 04 | S | PN 630 | 8 | M 16 x 1.5 | 18,0 | 19 | 6.0 x 1.5 |
VSM NW 06 | S | PN 630 | 10 | M 18 x 1.5 | 19,5 | 22 | 7.5 x 1.5 |
VSM NW 08 | S | PN 630 | 12 | M 20 x 1.5 | 19,0 | 24 | 9.0 x 1.5 |
VSM NW 10 | S | PN 630 | 14 | M 22 x 1.5 | 21,0 | 27 | 10.0 x 2.0 |
VSM NW 13 | S | PN 400 | 16 | M 24 x 1.5 | 22,0 | 30 | 12.0 x 2.0 |
VSM NW 16 | S | PN 400 | 20 | M 30 x 2 | 26,5 | 36 | 16.0 x 2.5 |
VSM NW 20 | S | PN 400 | 25 | M 36 x 2 | 27,5 | 46 | 20.0 x 2.5 |
VSM NW 25 | S | PN 400 | 30 | M 42 x 2 | 28,5 | 50 | 25.0 x 2.5 |
VSM NW 32 | S | PN 315 | 38 | M 52 x 2 | 32,5 | 60 | 33.0 x 2.5 |
PN = Nominal pressure PB = Max. operating pressure – Series: LL = Very light L = Light S = Heavy – Ø = External pipe diameter
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- VLM VA / VSM VA
- Blanking nut, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.