SKM IR SN H
Plug-in coupling sleeveProduct image
Properties
Application |
General application, e.g. in industry, construction machinery, agricultural technology etc. |
Design |
Snap-tite series H |
Connection 1 |
BSP cylindrical internal threads |
Sealing form 1 |
for screw-in pins with shapes A, B and if necessary E |
Material |
Steel |
Surface |
electro galvanised |
Description
Plug-in couplings allow quick coupling.
Item
Sort upwards
Sort downwards
Identification | DN* | Connecting thread | Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
---|---|---|---|---|---|---|
SKM 06 IR SN H | 6 | G 1/4" -19 | 450,0 | 2 | -40 | 90 |
SKM 10 IR SN H | 10 | G 3/8" -19 | 310,0 | 2 | -40 | 90 |
SKM 13 IR SN H | 12 | G 1/2" -14 | 280,0 | 2 | -40 | 90 |
SKM 20 IR SN H | 19 | G 3/4" -14 | 245,0 | 2 | -40 | 90 |
SKM 25 IR SN H | 25 | G 1" -11 | 140,0 | 2 | -40 | 90 |
SKM 32 IR SN H | 31 | G 1.1/4" -11 | 125,0 | 2 | -40 | 90 |
SKM 40 IR SN H | 38 | G 1.1/2" -11 | 105,0 | 2 | -40 | 90 |
SKM 50 IR SN H | 51 | G 2" -11 | 105,0 | 2 | -40 | 90 |
SKM 65 IR SN H | 65 | G 2.1/2" -11 | 70,0 | 2 | -40 | 90 |
SKM 75 IR SN H | 76 | G 3" -11 | 55,0 | 2 | -40 | 90 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Accessories
- SKM ZUBS SN H
- Dust protection coupling sleeve, SKM..SN H
Product versions
This product is also available in the following designs:
- SKM IR SN H VA
- Plug-in coupling sleeve, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.