Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SKS IR HC
Plug-in coupling connector
Product image
Properties
| Application |
Emergency tools, clamping tools, presses etc. |
| Connection 1 |
BSP cylindrical internal threads |
| Sealing form 1 |
for screw-in pins with shapes A, B and if necessary E |
| Scope of supply |
with dust protection |
| Material |
Steel |
| Surface |
electro galvanised |
Description
Coupling and uncoupling with minimal drips.
Plug-in coupling for quick coupling in the extreme pressure range.
Note
The connector may not be placed under load when uncoupled.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Connecting thread | L (mm) |
Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
|---|---|---|---|---|---|---|---|
| SKS 04 IR HC | 5 | G 1/8" -28 | 33,3 | 1000,0 | 2,5 | -30 | 100 |
| SKS 06 IR HC | 6 | G 1/4" -19 | 38,0 | 1000,0 | 2,5 | -30 | 100 |
| SKS 10 IR HC | 10 | G 3/8" -19 | 39,5 | 1000,0 | 2,5 | -30 | 100 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.