SRD VA
Cutting ringProduct image
Properties
Design |
Cutting ring |
Standard |
DIN 3861 shape B |
Material |
Stainless steel |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Ø d2 (mm) |
L1 (mm) |
---|---|---|---|
SRD 04 LL VA | LL | 4 | 6,0 |
SRD 06 LL VA | LL | 6 | 7,0 |
SRD 08 LL VA | LL | 8 | 7,0 |
SRD 06 VA | L / S | 6 | 9,5 |
SRD 08 VA | L / S | 8 | 9,5 |
SRD 10 VA | L / S | 10 | 10,0 |
SRD 12 VA | L / S | 12 | 10,0 |
SRD 14 VA | S | 14 | 10,0 |
SRD 15 VA | L | 15 | 10,0 |
SRD 16 VA | S | 16 | 10,5 |
SRD 18 VA | L | 18 | 10,0 |
SRD 20 VA | S | 20 | 12,5 |
SRD 22 VA | L | 22 | 10,5 |
SRD 25 VA | S | 25 | 12,5 |
SRD 28 VA | L | 28 | 10,5 |
SRD 30 VA | S | 30 | 13,0 |
SRD 35 VA | L | 35 | 13,0 |
SRD 38 VA | S | 38 | 13,5 |
SRD 42 VA | L | 42 | 13,0 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.