SRS DP 30-100
Cover plate for single pipe clampProduct image
Properties
Design |
for single pipe clamps |
Series |
heavy |
Standard |
DIN 3015-2 |
Material |
Steel |
Surface |
Size 1 to size 4 electro galvanised uncoated from size 5 |
Item
Sort upwards
Sort downwards
Identification | Clamp size | B (mm) |
C (mm) |
e1 (mm) |
L (mm) |
S (mm) |
---|---|---|---|---|---|---|
SRS DP 30 | 1 | 30 | 11,0 | 33 | 55 | 8 |
SRS DP 40 | 2 | 30 | 11,0 | 45 | 70 | 8 |
SRS DP 50 | 3 | 30 | 11,0 | 60 | 85 | 8 |
SRS DP 60 | 4 | 45 | 14,0 | 90 | 115 | 10 |
SRS DP 70 | 5 | 60 | 18,0 | 122 | 152 | 10 |
SRS DP 80 | 6 | 80 | 22,0 | 168 | 205 | 15 |
SRS DP 90 | 7 | 90 | 28,0 | 205 | 250 | 15 |
SRS DP 100 | 8 | 120 | 34,0 | 265 | 322 | 25 |
Product versions
This product is also available in the following designs:
- SRS DP 30-100 V4
- Cover plate for single pipe clamp, Stainless steel 1.4571
Additional element for following products
- C
- Configuration of group C
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.