Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SVB ND SB
Hose connectors
Product image
Properties
| Connection 1 |
Hose connection |
| Connection 2 |
Hose connection |
| Standard |
DIN 20038 |
| Media |
Compressed air |
| Material |
Steel |
Description
maximum hole size for greatest possible flow rate
rotating nozzle contour enables perfect hose seating
Note
To be integrated with DIN 20039 B hose clamps.
Item
Sort upwards
Sort downwards
 Identification |
for hose ID (mm) |
Ø ID (mm) |
b (mm) |
Length (mm) |
Ø Safety collar (mm) |
Operating pressure |
|---|---|---|---|---|---|---|
| SVB 13 ND SB | 13 | 9,00 | 13,5 | 80 | 25 | PN 25 |
| SVB 15 ND SB | 15 | 12,00 | 17,0 | 105 | 30 | PN 25 |
| SVB 19 ND SB | 19 | 16,00 | 21,0 | 105 | 34 | PN 25 |
| SVB 25 ND SB | 25 | 22,00 | 26,5 | 160 | 42 | PN 25 |
| SVB 32 ND SB | 32 | 27,00 | 33,5 | 175 | 50 | PN 25 |
| SVB 38 ND SB | 38 | 33,00 | 40,0 | 215 | 56 | PN 25 |
| SVB 50 ND SB | 50 | 45,00 | 51,0 | 225 | 78 | PN 25 |
| SVB 53 ND SB | 53 | 46,00 | 54,0 | 225 | 78 | PN 25 |
| SVB 75 ND SB | 75 | 68,00 | 76,0 | 250 | 110 | PN 25 |
Ø ID = Through hole
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.